Installing VASP5.3.5 undefined reference error

[ALarsen]

Installing VASP5.3.5

Hallo All
I have been having some problems with compiling VASP5.3.5. I use the intel fortran compiler version 14.0.0.
The output is this. I have not attached all the errors, it basically "undefined reference" errors.

####### Output
rm -f vasp
mpiifort -o vasp main.o base.o mpi.o smart_allocate.o xml.o constant.o jacobi.o main_mpi.o scala.o asa.o lattice.o poscar.o ini.o mgrid.o xclib.o vdw_nl.o xclib_grad.o radial.o pseudo.o gridq.o ebs.o mkpoints.o wave.o wave_mpi.o wave_high.o spinsym.o symmetry.o symlib.o lattlib.o random.o nonl.o nonlr.o nonl_high.o dfast.o choleski2.o mix.o hamil.o xcgrad.o xcspin.o potex1.o potex2.o constrmag.o cl_shift.o relativistic.o LDApU.o paw_base.o metagga.o egrad.o pawsym.o pawfock.o pawlhf.o rhfatm.o hyperfine.o paw.o mkpoints_full.o charge.o Lebedev-Laikov.o stockholder.o dipol.o pot.o dos.o elf.o tet.o tetweight.o hamil_rot.o chain.o dyna.o k-proj.o sphpro.o us.o core_rel.o aedens.o wavpre.o wavpre_noio.o broyden.o dynbr.o hamil_high.o rmm-diis.o reader.o writer.o tutor.o xml_writer.o brent.o stufak.o fileio.o opergrid.o stepver.o chgloc.o fast_aug.o fock_multipole.o fock.o mkpoints_change.o sym_grad.o mymath.o internals.o npt_dynamics.o dynconstr.o dimer_heyden.o dvvtrajectory.o subdftd3.o vdwforcefield.o nmr.o pead.o subrot.o subrot_scf.o paircorrection.o force.o pwlhf.o gw_model.o optreal.o steep.o davidson.o david_inner.o electron.o rot.o electron_all.o shm.o pardens.o optics.o constr_cell_relax.o stm.o finite_diff.o elpol.o hamil_lr.o rmm-diis_lr.o subrot_cluster.o subrot_lr.o lr_helper.o hamil_lrf.o elinear_response.o ilinear_response.o linear_optics.o setlocalpp.o wannier.o electron_OEP.o electron_lhf.o twoelectron4o.o gauss_quad.o m_unirnk.o minimax_tabs.o minimax.o mlwf.o ratpol.o screened_2e.o wave_cacher.o chi_base.o wpot.o local_field.o ump2.o ump2kpar.o fcidump.o ump2no.o bse_te.o bse.o acfdt.o chi.o sydmat.o lcao_bare.o wnpr.o dmft.o rmm-diis_mlr.o linear_response_NMR.o wannier_interpol.o linear_response.o auger.o getshmem.o dmatrix.o fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o -L ./vasp.5.lib -ldmy ./vasp.5.lib/linpack_double.o /software/cms/intel/composer_xe_2013_sp1.0.080/mkl/lib/intel64/libmkl_lapack95_lp64.a -L/software/cms/intel/composer_xe_2013_sp1.0.080/mkl/lib/intel64 -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -lpthread -lm
scala.o: In function `scala_mp_ppotrf_trtri_':
scala.f90:(.text+0x1ba): undefined reference to `blacs_gridinfo_'
scala.f90:(.text+0x1dc): undefined reference to `numroc_'
scala.f90:(.text+0x205): undefined reference to `numroc_'
scala.f90:(.text+0x63d): undefined reference to `blacs_gridinfo_'
scala.f90:(.text+0x679): undefined reference to `pzpotrf_'
scala.f90:(.text+0x79b): undefined reference to `pztrtri_'
scala.f90:(.text+0x7ed): undefined reference to `blacs_gridinfo_'
scala.f90:(.text+0x80f): undefined reference to `numroc_'
scala.f90:(.text+0x838): undefined reference to `numroc_'
scala.o: In function `scala_mp_ppotrf_potri_':
scala.f90:(.text+0xfea): undefined reference to `blacs_gridinfo_'
scala.f90:(.text+0x100c): undefined reference to `numroc_'
scala.f90:(.text+0x1035): undefined reference to `numroc_'
scala.f90:(.text+0x146d): undefined reference to `blacs_gridinfo_'
scala.f90:(.text+0x14a9): undefined reference to `pzpotrf_'
scala.f90:(.text+0x15be): undefined reference to `pzpotri_'
scala.f90:(.text+0x1610): undefined reference to `blacs_gridinfo_'
scala.f90:(.text+0x1632): undefined reference to `numroc_'
scala.f90:(.text+0x165b): undefined reference to `numroc_'
!!!! Gives many more of these undefined reference" errors


###### Makefile
# all CPP processed fortran files have the extension .f90
SUFFIX=.f90

#-----------------------------------------------------------------------
# fortran compiler and linker
#-----------------------------------------------------------------------
FC=ifort
# fortran linker
FCL=$(FC)


#-----------------------------------------------------------------------
# whereis CPP ?? (I need CPP, can't use gcc with proper options)
# that's the location of gcc for SUSE 5.3
#
# CPP_ = /usr/lib/gcc-lib/i486-linux/2.7.2/cpp -P -C
#
# that's probably the right line for some Red Hat distribution:
#
# CPP_ = /usr/lib/gcc-lib/i386-redhat-linux/2.7.2.3/cpp -P -C
#
# SUSE X.X, maybe some Red Hat distributions:

CPP_ = ./preprocess <$*.F | /usr/bin/cpp -P -C -traditional >$*$(SUFFIX)

# this release should be fpp clean
# we now recommend fpp as preprocessor
# if this fails go back to cpp
CPP_=fpp -f_com=no -free -w0 $*.F $*$(SUFFIX)

#-----------------------------------------------------------------------
# possible options for CPP:
# NGXhalf charge density reduced in X direction
# wNGXhalf gamma point only reduced in X direction
# avoidalloc avoid ALLOCATE if possible
# PGF90 work around some for some PGF90 / IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn MD package of Tomas Bucko

CPP = $(CPP_) -DHOST=\"LinuxIFC\" \
-DCACHE_SIZE=12000 -DPGF90 -Davoidalloc -DNGXhalf \
# -DRPROMU_DGEMV -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# general fortran flags (there must a trailing blank on this line)
# byterecl is strictly required for ifc, since otherwise
# the WAVECAR file becomes huge
#-----------------------------------------------------------------------

FFLAGS = -FR -names lowercase -assume byterecl

#-----------------------------------------------------------------------
# optimization
# we have tested whether higher optimisation improves performance
# -axK SSE1 optimization, but also generate code executable on all mach.
# xK improves performance somewhat on XP, and a is required in order
# to run the code on older Athlons as well
# -xW SSE2 optimization
# -axW SSE2 optimization, but also generate code executable on all mach.
# -tpp6 P3 optimization
# -tpp7 P4 optimization
#-----------------------------------------------------------------------

# ifc.9.1, ifc.10.1 recommended
OFLAG=-O2 -ip
OFLAG_HIGH = $(OFLAG)
OBJ_HIGH =
OBJ_NOOPT =
DEBUG = -FR -O0
INLINE = $(OFLAG)

#-----------------------------------------------------------------------
# the following lines specify the position of BLAS and LAPACK
# we recommend to use mkl, that is simple and most likely
# fastest in Intel based machines
#-----------------------------------------------------------------------

# mkl path for ifc 11 compiler
#MKL_PATH=$(MKLROOT)/lib/em64t

# mkl path for ifc 12 compiler
MKLROOT=/software/cms/intel/composer_xe_2013_sp1.0.080/mkl

MKL_FFTW_PATH=$(MKLROOT)/interfaces/fftw3xf/

# BLAS
# setting -DRPROMU_DGEMV -DRACCMU_DGEMV in the CPP lines usually speeds up program execution
# BLAS= -Wl,--start-group $(MKL_PATH)/libmkl_intel_lp64.a $(MKL_PATH)/libmkl_intel_thread.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group -lguide
# faster linking and available from at least version 11
BLAS= -L$(MKLROOT)/lib/intel64 -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -lpthread -lm


# LAPACK, use vasp.5.lib/lapack_double

#LAPACK= ../vasp.5.lib/lapack_double.o

# LAPACK from mkl, usually faster and contains scaLAPACK as well

LAPACK= $(MKLROOT)/lib/intel64/libmkl_lapack95_lp64.a

# here a tricky version, link in libgoto and use mkl as a backup
# also needs a special line for LAPACK
# this is the best thing you can do on AMD based systems !!!!!!

#BLAS = -Wl,--start-group /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_thread.a $(MKL_PATH)/libmkl_core.a -Wl,--end-group -liomp5
#LAPACK= /opt/libs/libgoto/libgoto.so $(MKL_PATH)/libmkl_intel_lp64.a

#-----------------------------------------------------------------------

LIB = -L ./vasp.5.lib -ldmy \
./vasp.5.lib/linpack_double.o $(LAPACK) \
$(BLAS)

# options for linking, nothing is required (usually)
LINK =

#-----------------------------------------------------------------------
# fft libraries:
# VASP.5.2 can use fftw.3.1.X (http://www.fftw.org)
# since this version is faster on P4 machines, we recommend to use it
#-----------------------------------------------------------------------

FFT3D = fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D = fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a

# you may also try to use the fftw wrapper to mkl (but the path might vary a lot)
# it seems this is best for AMD based systems
#FFT3D = fftw3d.o fft3dlib.o $(MKL_FFTW_PATH)/libfftw3xf_intel.a
#INCS = -I$(MKLROOT)/include/fftw
# MPI section, uncomment the following lines until
# general rules and compile lines
# presently we recommend OPENMPI, since it seems to offer better
# performance than lam or mpich
#
# !!! Please do not send me any queries on how to install MPI, I will
# certainly not answer them !!!!
#=======================================================================
#-----------------------------------------------------------------------
# fortran linker for mpi
#-----------------------------------------------------------------------

FC = mpiifort
#FCL=$(FC)

#-----------------------------------------------------------------------
# additional options for CPP in parallel version (see also above):
# NGZhalf charge density reduced in Z direction
# wNGZhalf gamma point only reduced in Z direction
# scaLAPACK use scaLAPACK (recommended if mkl is available)
# avoidalloc avoid ALLOCATE if possible
# PGF90 work around some for some PGF90 / IFC bugs
# CACHE_SIZE 1000 for PII,PIII, 5000 for Athlon, 8000-12000 P4, PD
# RPROMU_DGEMV use DGEMV instead of DGEMM in RPRO (depends on used BLAS)
# RACCMU_DGEMV use DGEMV instead of DGEMM in RACC (depends on used BLAS)
# tbdyn MD package of Tomas Bucko
#-----------------------------------------------------------------------

#-----------------------------------------------------------------------

CPP = $(CPP_) -DMPI -DHOST=\"LinuxIFC\" -DIFC \
-DCACHE_SIZE=4000 -DPGF90 -Davoidalloc -DNGZhalf \
-DMPI_BLOCK=8000 -Duse_collective -DscaLAPACK
## -DRPROMU_DGEMV -DRACCMU_DGEMV

#-----------------------------------------------------------------------
# location of SCALAPACK
# if you do not use SCALAPACK simply leave this section commented out
#-----------------------------------------------------------------------

# usually simplest link in mkl scaLAPACK
#BLACS= -lmkl_blacs_openmpi_lp64
#SCA=
#-----------------------------------------------------------------------
# libraries
#-----------------------------------------------------------------------
#
#LIB = -L../vasp.5.lib -ldmy \
# ../vasp.5.lib/linpack_double.o \
# $(SCA) $(LAPACK) $(BLAS)
#
#-----------------------------------------------------------------------
# parallel FFT
#-----------------------------------------------------------------------

# FFT: fftmpi.o with fft3dlib of Juergen Furthmueller
FFT3D = fftmpi.o fftmpi_map.o fft3dfurth.o fft3dlib.o

# alternatively: fftw.3.1.X is slighly faster and should be used if available
#FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o /opt/libs/fftw-3.1.2/lib/libfftw3.a

# you may also try to use the fftw wrapper to mkl (but the path might vary a lot)
# it seems this is best for AMD based systems
#FFT3D = fftmpiw.o fftmpi_map.o fftw3d.o fft3dlib.o $(MKL_FFTW_PATH)/libfftw3xf_intel.a
#INCS = -I$(MKLROOT)/include/fftw
#-----------------------------------------------------------------------
# general rules and compile lines
#-----------------------------------------------------------------------

[admin]

Check the path of the directory in which the BLAS is installed
and check whether your BLAS version includes components
which are reported as missing.